Streamline flow is more likely for liquids with

(a)	high density.	(b)	high viscosity.
(c)	low density.	(d)	low viscosity.

Choose the correct option:

1.	(a), (b)	2.	(c), (d)
3.	(b), (c)	4.	(a), (d)

A liquid does not wet the solid surface if the angle of contact is:
1. equal to $\mathrm{}$\(45^{\circ}\)
2. equal to \(60^{\circ}\)$\mathrm{}$
3. greater then \(90^{\circ}\)$\mathrm{}$
4. zero 

The cylindrical tube of a spray pump has a cross-section of \(8.0\) cm² one end of which has \(40\) fine holes each of diameter \(1.0\) mm. If the liquid flow inside the tube is \(1.5\) m-min^–1,  the speed of ejection of the liquid through the holes is:
1. \(0.64\) ms^-1
2. \(0.74\) ms^-1
3. \(0.54\) ms^-1
4. \(0.84\) ms^-1

In a horizontal pipe of a non-uniform cross-section, water flows with a velocity of \(1~\text{ms}^{-1}\)${\mathrm{}}^{}$ at a point where the diameter of the pipe is \(20 ~\text{cm}.\) The velocity of water \((\text{ms}^{-1})\) at a point where the diameter of the pipe is \(5~\text{cm}\) is:
1. \(8\)
2. \(16\)
3. \(24\)
4. \(32\)

A metal block of area \(0.10~\text{m}^{2}\) is connected to a \(0.010~\text{kg}\) mass via a string that passes over an ideal pulley (considered massless and frictionless), as in the figure below. A liquid film with a thickness of \(0.30~\text{mm}\) is placed between the block and the table. When released the block moves to the right with a constant speed of \(0.085~\text{m/s}.\) The coefficient of viscosity of the liquid is:

            
1. \(4.45 \times 10^{-2}~\text{Pa-s}\)
2. \(4.45 \times 10^{-3}~\text{Pa-s}\)
3. \(3.45 \times 10^{-2}~\text{Pa-s}\)
4. \(3.45 \times 10^{-3}~\text{Pa-s}\)

The velocity of a small ball of mass \(M\) and density \(d\), when dropped in a container filled with glycerine becomes constant after some time. If the density of glycerine is \(d\over 2\) then the viscous force acting on the ball will be:

A capillary tube of radius \(r\) is immersed in water and water rises in it to a height \(h.\) The mass of the water in the capillary is \(5\) g. Another capillary tube of radius \(2r\) is immersed in water. The mass of water that will rise in this tube is:

The water flows through a frictionless tube with a varying cross-section as shown in the figure. The variation of pressure \(P\) at the point \(x\) along the axis is roughly given by:

1.		2.
3.		4.

From the given diagram, what is the velocity \(v_3?\)
               
1. \(4~\text{m/s}\)
2. \(3~\text{m/s}\)
3. \(1~\text{m/s}\)
4. \(2~\text{m/s}\)