Q. No.In an ac circuit the reactance of a coil is \(\sqrt{3}\) times its resistance, the phase difference between the voltage across the coil to the current through the coil will be:
1. \(
\pi / 3
\)
2. \( \pi / 2
\)
3. \( \pi / 4
\)
4. \( \pi / 6\)
1. \( \pi / 3 \)
2. \( \pi / 2 \)
3. \( \pi / 4 \)
4. \( \pi / 6\)
The power factor of an ac circuit having resistance (R) and inductance (L) connected in series and an angular velocity ω is
1.
2.
3.
4.
An inductor of inductance \(L\) and resistor of resistance \(R\) are joined in series and connected by a source of frequency \(\omega\). The power dissipated in the circuit is:
| 1. | \(\dfrac{\left( R^{2} +\omega^{2} L^{2} \right)}{V}\) | 2. | \(\dfrac{V^{2} R}{\left(R^{2} + \omega^{2} L^{2} \right)}\) |
| 3. | \(\dfrac{V}{\left(R^{2} + \omega^{2} L^{2}\right)}\) | 4. | \(\dfrac{\sqrt{R^{2} + \omega^{2} L^{2}}}{V^{2}}\) |
In an \(LCR\) circuit, the potential difference between the terminals of the inductance is \(60\) V, between the terminals of the capacitor is \(30\) V and that between the terminals of the resistance is \(40\) V. The supply voltage will be equal to:
1. \(50\) V
2. \(70\) V
3. \(130\) V
4. \(10\) V
In a circuit, \(L, C\) and \(R\) are connected in series with an alternating voltage source of frequency \(f.\) The current leads the voltage by \(45^{\circ}\). The value of \(C\) will be:
| 1. | \(\dfrac{1}{2 \pi f \left( 2 \pi f L + R \right)}\) | 2. | \(\dfrac{1}{\pi f \left(2 \pi f L + R \right)}\) |
| 3. | \(\dfrac{1}{2 \pi f \left( 2 \pi f L - R \right)}\) | 4. | \(\dfrac{1}{\pi f \left(2 \pi f L - R \right)}\) |
In an LR-circuit, the inductive reactance is equal to the resistance R of the circuit. An e.m.f. applied to the circuit. The power consumed in the circuit is:
1.
2.
3.
4.
One 10 V, 60 W bulb is to be connected to 100 V line. The required induction coil has a self-inductance of value: (f = 50 Hz)
1. 0.052 H
2. 2.42 H
3. 16.2 mH
4. 1.62 mH
In the circuit given below, what will be the reading of the voltmeter
1. 300 V
2. 900 V
3. 200 V
4. 400 V
In the circuit shown below, what will be the readings of the voltmeter and ammeter?
1. \(800~\text{V}, 2~\text{A}\)
2. \(300~\text{V}, 2~\text{A}\)
3. \(220~\text{V}, 2.2~\text{A}\)
4. \(100~\text{V}, 2~\text{A}\)
The diagram shows a capacitor C and a resistor R connected in series to an ac source. V1 and V2 are voltmeters and A is an ammeter:
Consider now the following statements
I. Readings in A and V2 are always in phase
II. Reading in V1 is ahead in phase with reading in V2
III. Readings in A and V1 are always in phase
Which of these statements is/are correct?
1. I only
2. II only
3. I and II only
4. II and III only
© 2024 GoodEd Technologies Pvt. Ltd.