A transformer has 100 turns in the primary coil and carries 8 A current. If input power is one kilowatt, the number of turns required in the secondary coil to have 500V output will be
1. 100
2. 200
3. 400
4. 300
The potential difference V and the current i flowing through an instrument in an ac circuit of frequency f are given by volts and I = 2 sin ωt amperes (where ω = 2πf). The power dissipated in the instrument is
1. Zero
2. 10 W
3. 5 W
4. 2.5 W
A generator produces a voltage that is given by V = 240 sin 120 t, where t is in seconds. The frequency and r.m.s. voltage are
1. 60 Hz and 240 V
2. 19 Hz and 120 V
3. 19 Hz and 170 V
4. 754 Hz and 70 V
The peak value of an alternating e.m.f. E is given by is 10 volts and its frequency is 50 Hz. At time , the instantaneous e.m.f. is
1. 10 V
2.
3. 5 V
4. 1 V
If a current I given by flows in an ac circuit across which an ac potential of has been applied, then the power consumption P in the circuit will be
1.
2.
3.
4. P = 0
1. | \( 0.2~\text{sec}\) | 2. | \( 0.25~\text{sec}\) |
3. | \(25 \times10^{-3}~\text{sec}\) | 4. | \(2.5 \times10^{-3}~\text{sec}\) |
A resistance of \(300~\Omega\) and an inductance of \(\frac{1}{\pi}\) henry are connected in series to an AC voltage of \(20\) volts and a \(200\) Hz frequency. The phase angle between the voltage and current will be:
1. | \(\tan^{- 1} \dfrac{4}{3}\) | 2. | \(\tan^{- 1} \dfrac{3}{4}\) |
3. | \(\tan^{- 1} \dfrac{3}{2}\) | 4. | \(\tan^{- 1} \dfrac{2}{5}\) |
In a region of uniform magnetic induction B = 10–2 tesla, a circular coil of radius 30 cm and resistance π2 ohm is rotated about an axis that is perpendicular to the direction of B and which forms a diameter of the coil. If the coil rotates at 200 rpm the amplitude of the alternating current induced in the coil is :
1. 4π2 mA
2. 30 mA
3. 6 mA
4. 200 mA
In a LCR circuit having L = 8.0 henry, C = 0.5 μF and R = 100 ohm in series. The resonance frequency in radian per second is
1. 600 radian/second
2. 600 Hz
3. 500 radian/second
4. 500 Hz