In a conductor 4 coulombs of charge flows for 2 seconds. The value of electric current will be :

(1) 4 volts

(2) 4 amperes

(3) 2 amperes

(4) 2 volts

The specific resistance of a wire is ρ, its volume is 3 m³ and its resistance is 3 ohms, then its length will be 

(1) $\sqrt{\frac{1}{\rho }}$

(2) $\frac{3}{\sqrt{\rho }}$

(3) $\frac{1}{\rho }\sqrt{3}$

(4) $\rho \sqrt{\frac{1}{3}}$ 

When a piece of aluminum wire of finite length is drawn through a series of dies to reduce its diameter to half its original value, its resistance will become :

(1) Two times

(2) Four times

(3) Eight times

(4) Sixteen times

Through a semiconductor, an electric current is due to drift off:

(1) Free electrons

(2) Free electrons and holes

(3) Positive and negative ions

(4) Protons

The specific resistance of all metals is most affected by :

(1) Temperature

(2) Pressure

(3) Degree of illumination

(4) Applied magnetic field

The positive temperature coefficient of resistance is for :

(1) Carbon

(2) Germanium

(3) Copper

(4) An electrolyte

The electric intensity E, current density j and specific resistance k are related to each other by the relation :

(1) E = j/k

(2) E = jk

(3) E = k/j

(4) k = jE

The resistance of a wire of uniform diameter d and length L is R. The resistance of another wire of the same material but diameter 2d and length 4L will be :

(1) 2R

(2) R

(3) R/2

(4) R/4

There is a current of 1.344 amp in a copper wire whose area of cross-section normal to the length of the wire is 1 mm². If the number of free electrons per cm³ is 8.4 × 10²², then the drift velocity would be :

1. 1.0 mm/sec

2. 1.0 m/sec

3. 0.1 mm/sec

4. 0.01 mm/sec