The current \(I\) as shown in the circuit will be:

1.	\(10~\text{A}\)	2.	\(\dfrac{20}{3}~\text{A}\)
3.	\(\dfrac{2}{3}~\text{A}\)	4.	\(\dfrac{5}{3}~\text{A}\)

A meter bridge is set up to determine unknown resistance \(x\) using a standard \(10~\Omega\) resistor. The galvanometer shows the null point when the tapping key is at a \(52\) cm mark. End corrections are \(1\) cm and \(2\) cm respectively for end \(A\) and \(B\). Then the value of \(x\) is:

      
1. \(10.2~\Omega\)
2. \(10.6~\Omega\)
3. \(10.8~\Omega\)
4. \(11.1~\Omega\)

The resistivity of iron is 1 × 10^–7 ohm – m. The resistance of iron wire of particular length and thickness is 1 ohm. If the length and the diameter of wire both are doubled, then the resistivity in ohm – m will be :

1. 1 × 10^–7

2. 2 × 10^–7

3. 4 × 10^–7

4. 8 × 10^–7

The resistivity of a wire :

Drift velocity \(v_d\) varies with the intensity of the electric field as per the relation:
1. \(v_{d} \propto E\)
2. \(v_{d} \propto \frac{1}{E}\)
3. \(v_{d}= \text{constant}\)
4. \(v_{d} \propto E^2\)

In a conductor 4 coulombs of charge flows for 2 seconds. The value of electric current will be :

1. 4 volts

2. 4 amperes

3. 2 amperes

4. 2 volts

The specific resistance of a wire is ρ, its volume is 3 m³ and its resistance is 3 ohms, then its length will be 

1. $\sqrt{\frac{1}{\rho }}$

2. $\frac{3}{\sqrt{\rho }}$

3. $\frac{1}{\rho }\sqrt{3}$

4. $\rho \sqrt{\frac{1}{3}}$ 

When a piece of aluminum wire of finite length is drawn through a series of dies to reduce its diameter to half its original value, its resistance will become :

1. Two times

2. Four times

3. Eight times

4. Sixteen times

Through a semiconductor, an electric current is due to drift off:

1. Free electrons

2. Free electrons and holes

3. Positive and negative ions

4. Protons