The reaction taking place  at anode when an aqueous solution of CuSO4 is electrolysed using inert Pt electrode:

1. 2SO42-  S2O32- + 2e

2. Cu2+ + 2e Cu

3. 2H2 O2 + 4H+ + 4e

4. 2H+ +2e  H2

CuSO4 का जलीय विलयन होने पर एनोड पर अभिक्रिया होती है निष्क्रिय इलेक्ट्रो इलेक्ट्रोड का उपयोग करके इलेक्ट्रोलाइट किया जाता है:

जब CuSO4 का एक जलीय विलयन अक्रिय Pt इलेक्ट्रोड का उपयोग करके विद्युत अपघटित किया जाता है तो एनोड पर अभिक्रिया होती है:

(1) 2SO42-  S2O32- + 2e

(2) Cu2+ + 2e Cu

(3) 2H2 O2 + 4H+ + 4e

(4) 2H+ +2e  H2

Level 4: Below 35%
Hints

What mass of copper will be deposited by passing 2 faraday of electricity through a solution of Cu(II) salt?

1. 35.6 g

2. 63.5 g

3. 6.35 g

4. 3.56 g

 

Cu (II) लवण के विलयन के माध्यम से विद्युत के 2 फैराडे को पारित करके कॉपर का कितना द्रव्यमान निक्षेपित किया जाएगा?

(1) 35.6 g

(2) 63.5 g

(3) 6.35 g

(4) 3.56 g

 

Level 3: 35%-60%
Hints

The solution of CuSO4 in which copper rod is immersed is diluted to 10 times, the reduction electrode potential:

1. increases by 0.030 V

2. decreases by 0.030 V

3. increases by 0.059 V

4. decreases by 0.059 V

CuSO4 का विलयन जिसमें कॉपर की छड़ डूबी है, को 10 बार तनु किया जाता है, अपचयन इलेक्ट्रोड विभव:

(1) 0.030 V से बढ़ता है

(2) 0.030 V से घटता है

(3) 0.059 V से बढ़ता है

(4) 0.059 V से घटता है

 54%
Level 3: 35%-60%
Hints

advertisementadvertisement

Standard reduction potentials at 25°C of Li+/Li, Ba2+/Ba, Na+/Na and Mg2+/Mg are -3.05, -2.90, -2.71 and -2.37 V respectively. Which one of the following is the strongest oxidising agent ?

1. Mg2+

2. Ba2+

3. Na+

4. Li+

25°C पर Li+/Li, Ba2+/Ba, Na+/Na और Mg2+/Mg के मानक अपचयन विभव क्रमशः -3.05, -2.90, -2.71 और -2.37 V है। निम्नलिखित में से कौन सबसे प्रबल ऑक्सीकारक है?

(1) Mg2+

(2) Ba2+

(3) Na+

(4) Li+

Level 4: Below 35%
Hints

A 5A current is passed through a solution of copper sulphate for 40 min. The amount of copper deposited at the cathode is 

1. 40.65g

2. 0.4065g

3. 4.065g

4. 65.04g

40 मिनट के लिए ज़िंक सल्फेट के विलयन के माध्यम से एक 5A धारा को पारित किया जाता है। कैथोड पर निक्षेपित ज़िंक की मात्रा है

(1) 40.65 g

(2) 0.4065 g

(3) 4,065 g

(4) 65.04 g

Level 4: Below 35%
Hints

Which is the correct representation for Nernst equation ?

1. ERP=ERP+0.059nlogoxidantreductant

2. EOP=EOP-0.059nlogoxidantreductant

3. EOP=EOP+0.059nlogreductantoxidant

4. All of the above

नेनर्स्ट समीकरण के लिए सही प्रतिनिधित्व कौन सा है?

(1) ERP=ERP+0.059nlogऑक्सीकारकअपचायक

(2) EOP=EOP-0.059nlogऑक्सीकारकअपचायक

(3) EOP=EOP+0.059nlogअपचायकऑक्सीकारक

(4) उपरोक्त सभी

Level 4: Below 35%
Hints

advertisementadvertisement

The Zn acts as sacrificial or cathodic protection to prevent rusting of iron because:

1. EOP of Zn < EOP of Fe

2. EOP of Zn > EOP of Fe

3. EOP of Zn = EOP of fe

4. Zn is cheaper than iron

Zn लोहे में जंग को रोकने के लिए उत्सर्गी या कैथोडी रक्षण के रूप में कार्य करता है क्योंकि:

(1) Zn का EOP <  Fe का EOP

(2) Zn का EOP > Fe का EOP

(3) Zn का EOP =  fe का EOP

(4) Zn लोहे से सस्ता है

Level 4: Below 35%
Hints

Saturated solution of KNO3 is used to make 'salt-bridge' because:

1. velocity of K+ is greater than that of NO3-

2. velocity of NO3- is greater than that of K+

3. Velocities of both K+ and NO3- are nearly the same

4. KNO3 is highly soluble in water

KNO3 का संतृप्त विलयन 'लवण-सेतु' बनाने के लिए उपयोग किया जाता है क्योंकि:

(1) K+ का वेग NO3- की तुलना में अधिक है

(2) NO3- का वेग Kकी तुलना में अधिक है

(3) दोनों K+ और NO3- का वेग लगभग समान हैं

(4) KNOजल में अत्यधिक घुलनशील है

 50%
Level 3: 35%-60%
Hints

E0 for Fe2+ + 2e → Fe is -0.44 volt and E0 for Zn2+ + 2e→ Zn is -0.76 volt, thus:

1. Zn is more electropositive than Fe

2. Fe is more electropositive than Zn

3. Zn is more electronegative

4. none of the above  

Fe2+ + 2e → Fe के लिए E0 -0.44 वोल्ट और Zn2+ + 2e→ Zn के लिए E0 -0.76 वोल्ट है, इसप्रकार:

(1) Z, Fe की तुलना में अधिक विद्युतधनात्मक है

(2) Fe, Zn की तुलना में अधिक विद्युतधनात्मक है

(3) Zn अधिक विद्युतऋणात्मक है

(4) उपरोक्त में से कोई नहीं

Level 3: 35%-60%
Hints

advertisementadvertisement

During the charging of lead storage battery, the reaction at anode is represented by:

1. Pb2++SO42-PbSO4

2. PbSO4+H2OPbO2+SO42-+2H+

3. PbPb2++2e

4. Pb2++2ePb

लेड संचायक बैटरी आवेशित करने के दौरान, एनोड पर अभिक्रिया द्वारा दर्शाया जाता है:

(1) Pb2++SO42-PbSO4

(2) PbSO4+H2OPbO2+SO42-+2H+

(3) PbPb2++2e

(4) Pb2++2ePb

 50%
Level 3: 35%-60%
Hints