A charged particle having drift velocity of \(7.5\times10^{-4}~\text{ms}^{-1}\) in an electric field of \(3\times10^{-10}~\text{Vm}^{-1}\), has mobility of:
1. \(2.5\times 10^{6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
2. \(2.5\times 10^{-6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
3. \(2.25\times 10^{-15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
4. \(2.25\times 10^{15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
For the given circuit, the value of the resistance in which the maximum heat is produced is:
1. 2
2. 6
3. 4
4. 12
Twelve wires of equal resistance R are connected to form a cube. The effective resistance between two diagonal ends A and E will be:
1.
2.
3.
4.
A potential divider is used to give outputs of 2 V and 3 V from a 5 V source, as shown in the figure.
Which combination of resistances, from the ones given below, give the correct voltages?
1. | \(\mathrm{R}_1=1 \mathrm{k} \Omega, \mathrm{R}_2=1 \mathrm{k} \Omega, \mathrm{R}_3=2 \mathrm{k} \Omega\) |
2. | \(\mathrm{R}_1=2 \mathrm{k} \Omega, \mathrm{R}_2=1 \mathrm{k} \Omega, \mathrm{R}_3=2 \mathrm{k} \Omega\) |
3. | \(\mathrm{R}_1=1 \mathrm{k} \Omega, \mathrm{R}_2=2 \mathrm{k} \Omega, \mathrm{R}_3=2 \mathrm{k} \Omega\) |
4. | \(\mathrm{R}_1=3 \mathrm{k} \Omega, \mathrm{R}_2=2 \mathrm{k} \Omega, \mathrm{R}_3=2 \mathrm{k} \Omega\) |
Two batteries, one of emf 18V and internal resistance 2 and the other of emf 12 V and internal resistance 1 are connected as shown. Reading of the voltmeter is:
(if voltmeter is ideal)
1. 14 V
2. 15 V
3. 18 V
4. 30 V
Current through the \(2~\Omega\) resistance in the electrical network shown is:
1. | zero | 2. | \(1\) A |
3. | \(3\) A | 4. | \(5\) A |
The dependence of resistivity \((\rho)\) on the temperature \((T)\) of a semiconductor is, roughly, represented by:
1. | 2. | ||
3. | 4. |
What is the reading of the voltmeter of resistance 1200 connected in the following circuit diagram?
1. 2.5 V
2. 5.0 V
3. 7.5 V
4. 40 V
A coil heating a bucket full of water raises the temperature by 5 C in 2 min. lf the current in the coil is doubled, what will be the change in the temperature of water in 1 min? (Assume no loss of heat to the surroundings)
1. | 10 °C | 2. | 5 °C |
3. | 20 °C | 4. | 15 °C |
Power consumed in the given circuit is \(P_1\). On interchanging the position of \(3~\Omega\) and \(12~\Omega\) resistances, the new power consumption is \(P_2\). The ratio of \(\frac{P_2}{P_1}\) is:
1. | \(2\) | 2. | \(1 \over 2\) |
3. | \(3 \over 5\) | 4. | \(2 \over 5\) |