Select Question Set:

The maximum elongation of a steel wire of \(1~\text m\) length if the elastic limit of steel and its Young's modulus, respectively, are \(8 × 10^8 ~\text{N m}^{-2 }\) and \(2 × 10^{11} ~\text{N m}^{-2},\) is:

1. \(0.4~\text{mm}\)

2. \(40~\text{mm}\)

3. \(8~\text{mm}\)

4. \(4~\text{mm}\)

1. \(0.4~\text{mm}\)

2. \(40~\text{mm}\)

3. \(8~\text{mm}\)

4. \(4~\text{mm}\)

Subtopic: Young's modulus |

66%

From NCERT

NEET - 2024

Please attempt this question first.

Hints

Please attempt this question first.

Let a wire be suspended from the ceiling (rigid support) and stretched by a weight \(W\) attached at its free end. The longitudinal stress at any point of cross-sectional area \(A\) of the wire is:

1. zero

2. \(\dfrac{2W}{A}\)

3. \(\dfrac{W}{A}\)

4. \(\dfrac{W}{2A}\)

1. zero

2. \(\dfrac{2W}{A}\)

3. \(\dfrac{W}{A}\)

4. \(\dfrac{W}{2A}\)

Subtopic: Stress - Strain |

66%

From NCERT

NEET - 2023

Please attempt this question first.

Hints

Please attempt this question first.

The amount of elastic potential energy per unit volume (in SI unit) of a steel wire of length \(100\) cm to stretch it by \(1\) mm is: (Given: Young's modulus of the wire = \(2.0\times 10^{11}\) Nm^{-2})

1. | \(10^{11}\) | 2. | \(10^{17}\) |

3. | \(10^{7}\) | 4. | \(10^{5}\) |

Subtopic: Potential energy of wire |

63%

From NCERT

NEET - 2023

Please attempt this question first.

Hints

Please attempt this question first.

Given below are two statements:

Assertion (A): |
The stretching of a spring is determined by the shear modulus of the material of the spring. |

Reason (R): |
A coil spring of copper has more tensile strength than a steel spring of the same dimensions. |

1. | Both (A) and (R) are True and (R) is the correct explanation of (A). |

2. | Both (A) and (R) are True but (R) is not the correct explanation of (A). |

3. | (A) is False but (R) is True. |

4. | (A) is True but (R) is False. |

Subtopic: Shear and bulk modulus |

From NCERT

NEET - 2022

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Hints

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

A wire of length \(L\), area of cross section \(A\) is hanging from a fixed support. The length of the wire changes to \(\mathrm{L}_1\)when mass \(M\) is suspended from its free end. The expression for Young's modulus is:

1. | \(\frac{{Mg(L}_1-{L)}}{{AL}}\) | 2. | \(\frac{{MgL}}{{AL}_1}\) |

3. | \(\frac{{MgL}}{{A(L}_1-{L})}\) | 4. | \(\frac{{MgL}_1}{{AL}}\) |

Subtopic: Young's modulus |

78%

From NCERT

NEET - 2020

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Hints

Links

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

When a block of mass \(M\) is suspended by a long wire of length \(L\), the length of the wire becomes (\(L+l\)). The elastic potential energy stored in the extended wire is:

1. \({1}/{2}~MgL\)

2. \(Mgl\)

3. \(MgL\)

4. \({1}/{2}~Mgl\)

Subtopic: Potential energy of wire |

69%

From NCERT

NEET - 2019

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Hints

Links

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

The stress-strain curves are drawn for two different materials \(X\) and \(Y.\) It is observed that the ultimate strength point and the fracture point are close to each other for material \(X\) but are far apart for material \(Y.\) We can say that the materials \(X\) and \(Y\) are likely to be (respectively):

1. | ductile and brittle |

2. | brittle and ductile |

3. | brittle and plastic |

4. | plastic and ductile |

Subtopic: Stress - Strain Curve |

81%

From NCERT

NEET - 2019

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Hints

Links

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Two wires are made of the same material and have the same volume. The first wire has a cross-sectional area \(A\) and the second wire has a cross-sectional area \(3A\). If the length of the first wire is increased by \(\Delta l\) on applying a force \(F\), how much force is needed to stretch the second wire by the same amount?

1. | \(9F\) | 2. | \(6F\) |

3. | \(4F\) | 4. | \(F\) |

Subtopic: Young's modulus |

76%

From NCERT

NEET - 2018

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Hints

Links

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

The bulk modulus of a spherical object is \(B\). If it is subjected to uniform pressure \(P\), the fractional decrease in radius will be:

1. \(\frac{P}{B}\)

2. \(\frac{B}{3P}\)

3. \(\frac{3P}{B}\)

4. \(\frac{P}{3B}\)

Subtopic: Shear and bulk modulus |

62%

From NCERT

NEET - 2017

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Hints

Links

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

The Young's modulus of steel is twice that of brass. Two wires of the same length and of the same area of cross-section, one of steel and another of brass are suspended from the same roof. If we want the lower ends of the wires to be at the same level, then the weight added to the steel and brass wires must be in the ratio of:

1. | \(1:2\) | 2. | \(2:1\) |

3. | \(4:1\) | 4. | \(1:1\) |

Subtopic: Young's modulus |

73%

From NCERT

NEET - 2015

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Hints

Links

To view explanation, please take trial in the course.

NEET 2025 - Target Batch

Select Question Set: