Select Chapter Topics:
Q. No.The quantities which have the same dimensions as those of solid angle are:
1. stress and angle
2. strain and arc
3. angular speed and stress
4. strain and angle
1. stress and angle
2. strain and arc
3. angular speed and stress
4. strain and angle
Subtopic: Dimensions |
63%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
In a vernier callipers, \((N+1)\) divisions of the vernier scale coincide with \(N\) divisions of the main scale. If \(1\) \(\text{MSD}\) represents \(0.1~\text{mm}\), the vernier constant (in \(\text{cm}\)) is:
| 1. | \(\dfrac{1}{100(N+1)} \) | 2. | \(100N\) |
| 3. | \(10(N+1) \) | 4. | \(\dfrac{1}{10 N}\) |
Subtopic: Measurement & Measuring Devices |
70%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
A force defined by; \(F = \alpha t^2 + \beta t\) acts on a particle at a given time \(t.\) The factor which is dimensionless, if \(\alpha\) and \(\beta\) are constants, is:
| 1. | \(\alpha t / \beta \) | 2. | \(\alpha \beta t \) |
| 3. | \(\alpha \beta / t \) | 4. | \(\beta t / \alpha\) |
Subtopic: Dimensions |
64%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
The percentage errors in the measurement of mass and momentum of an object are \(1\%\) and \(2\%\) respectively. The percentage error in the measurement of kinetic energy of the object is:
1. \(1\%\)
2. \(3\%\)
3. \(4\%\)
4. \(5\%\)
1. \(1\%\)
2. \(3\%\)
3. \(4\%\)
4. \(5\%\)
Subtopic: Errors |
64%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
Match List- I with List- II.
Choose the correct answer from the options given below:
| List-I (Measured values) |
List-II (Significant figures) |
||
| A. | \(0.001213\) | I. | \(2\) |
| B. | \(2.1 \times 10^{16} \) | II. | \(3\) |
| C. | \(3.70\) | III. | \(1\) |
| D. | \(3000\) | IV. | \(4\) |
Choose the correct answer from the options given below:
| 1. | A-III, B-II, C-I, D-IV |
| 2. | A-III, B-I, CII, D-IV |
| 3. | A-I, B-II, C-IV, D-III |
| 4. | A-IV, B-I, C-II, D-III |
Subtopic: Significant Figures |
86%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
A vernier calipers has \(1~\text{mm}\) marks on the main scale. It has \(20\) equal divisions on the vernier scale which match with \(16\) main scale divisions. The least count of this vernier calipers is:
1. \(0.02~\text{mm}\)
2. \(0.05~\text{mm}\)
3. \(0.10~\text{mm}\)
4. \(0.20~\text{mm}\)
1. \(0.02~\text{mm}\)
2. \(0.05~\text{mm}\)
3. \(0.10~\text{mm}\)
4. \(0.20~\text{mm}\)
Subtopic: Measurement & Measuring Devices |
65%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
The pitch of an error-free screw gauge is \(1~\text{mm}\) and there are \(100\) divisions on the circular scale. While measuring the diameter of a thick wire, the pitch scale reads \(1~\text{mm}\) and \(63^\text{rd}\) division on the circular scale coincides with the reference line. The diameter of the wire is:
1. \(1.63 ~\text{cm}\)
2. \(0.163 ~\text{cm}\)
3. \(0.163~\text m\)
4. \(1.63 ~\text m\)
1. \(1.63 ~\text{cm}\)
2. \(0.163 ~\text{cm}\)
3. \(0.163~\text m\)
4. \(1.63 ~\text m\)
Subtopic: Measurement & Measuring Devices |
73%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
The potential energy of a particle moving along the \(x\text-\)direction varies as \(\mathrm{V}=\frac{\mathrm{A}x^{2}}{\sqrt{x}+\mathrm{B}}.\)The dimensions of \(\frac{\mathrm{A}^2}{\mathrm{B}}\) are:
1. \([{M}^{3/2}{L}^{1/2}{T}^{-3}]\)
2. \([M^{1/2}LT^{-3}]\)
3. \([{M}^2{L}^{1/2}{T}^{-4}]\)
4. \([ML^{2}T^{-4}]\)
1. \([{M}^{3/2}{L}^{1/2}{T}^{-3}]\)
2. \([M^{1/2}LT^{-3}]\)
3. \([{M}^2{L}^{1/2}{T}^{-4}]\)
4. \([ML^{2}T^{-4}]\)
Subtopic: Dimensions |
78%
From NCERT
NEET - 2024
Please attempt this question first.
Hints
Please attempt this question first.
A metal wire has mass \((0.4\pm 0.002)~\mathrm{g}\), radius \((0.3\pm 0.001)~\mathrm{mm}\) and length \((5\pm 0.02)~\mathrm{cm}\). The maximum possible percentage error in the measurement of density will nearly be:
1. \(1.4 \%\)
2. \(1.2 \%\)
3. \(1.3 \%\)
4. \(1.6 \%\)
1. \(1.4 \%\)
2. \(1.2 \%\)
3. \(1.3 \%\)
4. \(1.6 \%\)
Subtopic: Errors |
From NCERT
NEET - 2023
Please attempt this question first.
Hints
Please attempt this question first.
The errors in the measurement which arise due to unpredictable fluctuations in temperature and voltage supply are:
1. Random errors
2. Instrumental errors
3. Personal errors
4. Least count errors
1. Random errors
2. Instrumental errors
3. Personal errors
4. Least count errors
Subtopic: Errors |
68%
From NCERT
NEET - 2023
Please attempt this question first.
Hints
Please attempt this question first.
Select Chapter Topics:
© 2024 GoodEd Technologies Pvt. Ltd.