Q. No.To get output \(Y = 1\) in the given circuit which of the following input will be correct?
| \(A\) | \(B\) | \(C\) | |
| 1. | 1 | 0 | 1 |
| 2. | 1 | 1 | 0 |
| 3. | 0 | 1 | 0 |
| 4. | 1 | 0 | 0 |
Subtopic: Logic gates |
92%
Level 1: 80%+
AIPMT - 2012
Hints
Given below are two statements:
| Assertion (A): | NAND or NOR gates are called digital building blocks. |
| Reason (R): | The repeated use of NAND (or NOR) gates can produce all the basic or complicated gates. |
| 1. | Both (A) and (R) are True and (R) is the correct explanation of (A). |
| 2. | Both (A) and (R) are True but (R) is not the correct explanation of (A). |
| 3. | (A) is True but (R) is False. |
| 4. | Both (A) and (R) are False. |
Subtopic: Logic gates |
90%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
The output of an OR gate is \(1\):
| 1. | if either or both inputs are \(1\). |
| 2. | only if both inputs are \(1\) or zero. |
| 3. | if either input is zero. |
| 4. | if both inputs are zero. |
Subtopic: Logic gates |
89%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
The given truth table is for which logic gate:
1. NAND
2. XOR
3. NOR
4. OR
| A | B | Y |
| \(1\) | \(1\) | \(0\) |
| \(0\) | \(1\) | \(1\) |
| \(1\) | \(0\) | \(1\) |
| \(0\) | \(0\) | \(1\) |
2. XOR
3. NOR
4. OR
Subtopic: Logic gates |
88%
Level 1: 80%+
AIPMT - 2002
Hints
The final gate in the circuit shown is a \(3\)-input OR-gate, which outputs a low (FALSE) only when all inputs are low (FALSE). A 'low' voltage is considered to be \(0\) or FALSE, while a 'high' voltage is considered to be \(1\) or TRUE.
For a certain input, it is observed that \(Y_1=Y_2=0,Y_3=1.\) Which, of the following inputs, can give this condition?
1. \(A=B=C=0\)
2. \(A=B=C=1\)
3. \(A=1,B=0,C=1\)
4. \(A=0,B=1,C=0\)
For a certain input, it is observed that \(Y_1=Y_2=0,Y_3=1.\) Which, of the following inputs, can give this condition?
1. \(A=B=C=0\)
2. \(A=B=C=1\)
3. \(A=1,B=0,C=1\)
4. \(A=0,B=1,C=0\)
Subtopic: Logic gates |
89%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
An input signal to a logic circuit's inputs is represented by a \(0,\) if the voltage is low (true) and by a \(1,\) if the voltage is high (false). The truth table representing the operation of the circuit is given by:
\(\begin{array}{|c|c|c|} \hline A & B & Y~\text{(output)} \\ \hline 0 & 0 & 0 \\ \hline 0 & 1 & 1 \\ \hline 1 & 0 & 0 \\ \hline 1 & 1 & 0 \\ \hline \end{array}\)
An input consisting of the following is presented to the pins \(A\) and \(B\):
The output \(Y\) is:
\(\begin{array}{|c|c|c|} \hline A & B & Y~\text{(output)} \\ \hline 0 & 0 & 0 \\ \hline 0 & 1 & 1 \\ \hline 1 & 0 & 0 \\ \hline 1 & 1 & 0 \\ \hline \end{array}\)
An input consisting of the following is presented to the pins \(A\) and \(B\):
| 1. | pin A: \(0110101001\) |
| 2. | pin B: \(1000011100\) |
| 1. | \(0110100001\) |
| 2. | \(1000010100\) |
| 3. | \(0111100011\) |
| 4. | \(1001010010\) |
Subtopic: Logic gates |
87%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
When the output of an OR gate is applied as input to a NOT gate, then the combination acts as a:
1. NAND gate
2. NOR gate
3. AND gate
4. OR gate
1. NAND gate
2. NOR gate
3. AND gate
4. OR gate
Subtopic: Logic gates |
87%
Level 1: 80%+
NEET - 2024
Hints
An AND gate is followed by a NOT gate in series. With two inputs \(A\) and \(B,\) the Boolean expression for the output \(Y\) will be:
1. \(\overline{{A}{+}{B}}\)
2. \(\overline{A.B}\)
3. \(A.B\)
4. \(\overline{\overline{A}{+}{B}}\)
1. \(\overline{{A}{+}{B}}\)
2. \(\overline{A.B}\)
3. \(A.B\)
4. \(\overline{\overline{A}{+}{B}}\)
Subtopic: Logic gates |
87%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
Consider the logic circuit represented in the above diagram. Assume that all the elements used are ideal.
Suppose that the inputs are as follows:
\(A\) = True, \(B\) = False, \(C\) = True
Which, of the following, is correct?
| 1. | \(X_1\) = True | 2. | \(X_2\) = True |
| 3. | \(X\) = False | 4. | none of the above |
Subtopic: Logic gates |
84%
Level 1: 80%+
Hints
To get output \('1’\) at \(R, \) for the given logic gate circuit the input values must be:
1. \(X = 0, Y = 1 \)
2. \(X = 1, Y = 1 \)
3. \(X = 1, Y = 0 \)
4. \(X = 0, Y = 0 \)
1. \(X = 0, Y = 1 \)
2. \(X = 1, Y = 1 \)
3. \(X = 1, Y = 0 \)
4. \(X = 0, Y = 0 \)
Subtopic: Logic gates |
86%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
© 2026 GoodEd Technologies Pvt. Ltd.