A resistor of \(200~\mathrm{\Omega}\) and a capacitor of \(15.0~\mu\text{F}\) are connected in series to a \(220~\text{V}\), \(50\) Hz AC source. The voltage (RMS) across the resistor and the capacitor are respectively:
1. \( 160.3 ~\text{V}, 160.3 ~\text{V} \)
2. \( 151 ~\text{V}, 151 ~\text{V} \)
3. \( 160.3 ~\text{V}, 151 ~\text{V} \)
4. \( 151 ~\text{V}, 160.3 ~\text{V}\)

A \(15.0~\mathrm{\mu F}\) capacitor is connected to a \(220~\mathrm{V}\), \(50~\mathrm{Hz}\) source. If the frequency is doubled, what happens to the capacitive reactance and the current?

A light bulb is rated at \(100~\text{W}\) for a \(220~\text{V}\) AC supply. The RMS current through the bulb is:
1. \(0.243\) A
2. \(0.454\) A
3. \(0.222\) A
4. \(0.312\) A

For a series \(\mathrm{LCR}\) circuit, the power loss at resonance is:
1. \(\frac{V^2}{\left[\omega L-\frac{1}{\omega C}\right]}\)

2. \( \mathrm{I}^2 \mathrm{~L} \omega \)

3. \(I^2 R\)

4. \( \frac{\mathrm{V}^2}{\mathrm{C} \omega} \)

The instantaneous values of alternating current and voltages in a circuit are given as,
\(i=\frac{1}{\sqrt{2}}\sin\left ( 100\pi t \right )~\text{Ampere}\)
\(e=\frac{1}{\sqrt{2}}\sin\left ( 100\pi t+\pi /3 \right )~\text{Volt}\)
What is the average power consumed by the circuit in watts?

An AC source is rated \(220~\mathrm{V}\), \(50~\mathrm{Hz}\). The average voltage is calculated in a time interval of \(0.01~\mathrm{s}\). It,

An AC source rated \(100~\text{V}\) (rms) supplies a current of \(10~\text{A}\) (rms) to a circuit. The average power delivered by the source: