For the circuit shown in the figure, the current \(I\) will be:
1. | \(0.75~\text{A}\) | 2. | \(1~\text{A}\) |
3. | \(1.5~\text{A}\) | 4. | \(0.5~\text{A}\) |
Two solid conductors are made up of the same material and have the same length and the same resistance. One of them has a circular cross-section of area and the other one has a square cross-section of area . The ratio is:
1. | \(1.5\) | 2. | \(1\) |
3. | \(0.8\) | 4. | \(2\) |
For the circuit given below, Kirchhoff's loop rule for the loop \(BCDEB\) is given by the equation:
1. | \(-{i}_2 {R}_2+{E}_2-{E}_3+{i}_3{R}_1=0\) |
2. | \({i}_2{R}_2+{E}_2-{E}_3-{i}_3 {R}_1=0\) |
3. | \({i}_2 {R}_2+{E}_2+{E}_3+{i}_3 {R}_1=0\) |
4. | \(-{i}_2 {R}_2+{E}_2+{E}_3+{i}_3{R}_1=0\) |
The equivalent resistance between \(A\) and \(B\) for the mesh shown in the figure is:
1. | \(7.2\) \(\Omega\) | 2. | \(16\) \(\Omega\) |
3. | \(30\) \(\Omega\) | 4. | \(4.8\) \(\Omega\) |
Match Column I and Column II with appropriate relations.
Column I | Column II | ||
(A) | Drift Velocity | (P) | \(\dfrac{ \mathrm{m}}{\mathrm{ne}^2 \rho}\) |
(B) | Electrical Resistivity | (Q) | \(nev_d\) |
(C) | Relaxation Period | (R) | \(\dfrac{ \mathrm{eE}}{\mathrm{m}} \tau\) |
(D) | Current Density | (S) | \(\dfrac{E}{J}\) |
(A) | (B) | (C) | (D) | |
1. | (R) | (P) | (S) | (Q) |
2. | (R) | (Q) | (S) | (P) |
3. | (R) | (S) | (P) | (Q) |
4. | (R) | (S) | (Q) | (P) |
In a potentiometer circuit, a cell of emf \(1.5~\text{V}\) gives a balance point at 36 cm length of wire. If another cell of emf 2.5 V replaces the first cell, then at what length of the wire, the balance point occur?
1. 64 cm
2. 62 cm
3. 60 cm
4. 21.6 cm
The effective resistance of a parallel connection that consists of four wires of equal length, equal area of cross-section, and same material is \(0.25~\Omega\). What will be the effective resistance if they are connected in series?
1. \(1~\Omega\)
2. \(4~\Omega\)
3. \(0.25~\Omega\)
4. \(0.5~\Omega\)
Three resistors having resistances \(r_1, r_2~\text{and}~r_3\) are connected as shown in the given circuit. The ratio \(\frac{i_3}{i_1}\) of currents in terms of resistances used in the circuit is:
1. \(\frac{r_1}{r_1+r_2}\)
2. \(\frac{r_2}{r_1+r_3}\)
3. \(\frac{r_1}{r_2+r_3}\)
4. \(\frac{r_2}{r_2+r_3}\)
A resistance wire connected in the left gap of a meter bridge balances a \(10~\Omega\) resistance in the right gap at a point which divides the bridge wire in the ratio \(3:2\). lf the length of the resistance wire is \(1.5~\text{m}\), then the length of \(1~\Omega\) of the resistance wire will be:
1. \(1.0\times 10^{-1}~\text{m}\)
2. \(1.5\times 10^{-1}~\text{m}\)
3. \(1.5\times 10^{-2}~\text{m}\)
4. \(1.0\times 10^{-2}~\text{m}\)
A charged particle having drift velocity of \(7.5\times10^{-4}~\text{ms}^{-1}\) in an electric field of \(3\times10^{-10}~\text{Vm}^{-1}\), has mobility of:
1. \(2.5\times 10^{6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
2. \(2.5\times 10^{-6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
3. \(2.25\times 10^{-15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
4. \(2.25\times 10^{15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)