During the process of electrolytic refining of copper, metals that are present as impurities and settle as anode mud are :
1. Ag, and Au
2. Pb, and Zn
3. Fe, and Ni
4. Sn, and Ag
The correct match among the following is:
Column I | Column II |
(a) Boron | (i) Van Arkel method |
(b) Tin | (ii) Mond's process |
(c) Zirconium | (iii) Liquation |
(d) Nickel | (iv) Zone refining |
(a) | (b) | (c) | (d) | |
1. | (iv) | (iii) | (i) | (ii) |
2. | (iv) | (iii) | (ii) | (i) |
3. | (ii) | (i) | (iv) | (iii) |
4. | (iii) | (iv) | (i) | (ii) |
A metal's oxide that can be reduced by Fe as a reducing agent at a temperature is:
1. Zr
2. Ca
3. Mg
4. None of the above.
Iron is extracted from chalcopyrite as :
1. FeO
2. FeS
3. Fe2O3
4. FeSiO3
Native silver metal forms a water-soluble complex with a dilute aqueous solution of NaCN in the presence of:
1. Nitrogen
2. Oxygen
3. Carbon Dioxide
4. Argon
What method is used to extract zinc from zinc blende?
1. Electrolytic reduction
2. Roasting followed by reduction with carbon
3. Roasting followed by reduction with another metal
4. Roasting followed by self-reduction
An electrochemical process is used to extract:
1. Iron
2. Lead
3. Sodium
4. Silver
The correct statement among the following is:
1. | Blister copper has a blistered appearance due to the evolution of CO2. |
2. | Vapour phase refining is carried out for nickel by the Van Arkel method. |
3. | Pig iron can be moulded into a variety of shapes. |
4. | Wrought iron is impure iron with 4 % carbon. |
At a temperature above 1073 K, coke can be used to reduce FeO to Fe. It can be best explained by:
1. Ellingham diagram.
2. Orgel diagram.
3. Tunabo-Sugano diagram.
4. Born-Haber cycle.
The iron ore that is used to line the reverberatory furnace to prepare the purest form of iron is-
1. Haematite
2. FeO
3. \(Fe_{3}O_{4}\)
4. None of the above.