Due to capillary action, a liquid will rise in a tube, if the angle of contact is 

1. Acute

2. Obtuse

3. 90°

4. Zero

Two parallel glass plates are dipped partly in the liquid of density 'd' keeping them vertical. If the distance between the plates is 'x', surface tension for liquids is T and the angle of contact is $\mathrm{\theta }$, then rise of liquid between the plates due to capillary will be 

1. $\frac{\mathrm{T} \mathrm{cos\theta }}{\mathrm{xd}}$

2. $\frac{2\mathrm{T} \mathrm{cos\theta }}{\mathrm{xdg}}$

3. $\frac{2\mathrm{T} }{\mathrm{xdgcos\theta }}$

4. $\frac{\mathrm{T} \mathrm{cos\theta }}{\mathrm{xdg}}$

Water rises in a capillary tube to a certain height such that the upward force due to surface tension is balanced by $75\times {10}^{-4}$ $\mathrm{N}$ force due to the weight of the liquid. If the surface tension of water is $6\times {10}^{-2}$ ${\mathrm{Nm}}^{-1}$, the inner circumference of the capillary must be:

1. $1.25\times {10}^{-2}$ $\mathrm{m}$ 

2. $0.50\times {10}^{-2}$ $\mathrm{m}$

3. $6.5\times {10}^{-2}$ $\mathrm{m}$

4. $12.5\times {10}^{-2}$ $\mathrm{m}$

Two capillary tubes P and Q are dipped in water. The height of water level in capillary P is 2/3 to the height in Q capillary. The ratio of their diameters is

1. 2 : 3                           

2. 3 : 2

3. 3 : 4                           

4. 4 : 3

A vessel, whose bottom has round holes with a diameter of 0.1mm, is filled with water. The maximum height to which the water can be filled without leakage is
(S.T. of water =75 dyne/cm, g =1000 $\mathrm{cm}/{\mathrm{s}}^2$)

1. 100 cm

2. 75 cm

3. 50 cm

4. 30 cm

By inserting a capillary tube up to a depth l in water, the water rises to a height of h ( h<l). If the lower end of the capillary is closed inside the water and the capillary is taken out and closed-end opened, to what height the water will remain in the tube?

1. Zero

2. l+h 

3. 2h

4. h

A capillary tube when immersed vertically in liquid records a rise of 3 cm. If the tube is immersed in the liquid at an angle of $60°$ with the vertical. The length of the liquid column along the tube is 

1. 9cm

2. 6cm

3. 3cm

4. 2cm

The action of a nib split at the top is explained by

1. Gravity flow

2. Diffusion of fluid

3. Capillary action

4. Osmosis of liquid

The correct relation is

(1) $\mathrm{r}=\frac{2\mathrm{Tcos\theta }}{\mathrm{hdg}}$

(2) $\mathrm{r}=\frac{\mathrm{hdg}}{2\mathrm{Tcos\theta }}$

(3) $\mathrm{r}=\frac{2\mathrm{Tdgh}}{\mathrm{cos\theta }}$

(4) $\mathrm{r}=\frac{\mathrm{Tcos\theta }}{2\mathrm{hdg}}$

During the capillary rise of a liquid in a capillary tube, the surface of contact that remains constant is of

(1) Glass and liquid

(2) Air and glass

(3) Air and liquid

(4) All of these