Four condensers each of capacity 4 μF are connected as shown in figure and V_P – V_Q = 15 volts. The energy stored in the system is 

1. 2400 ergs

2.1800 ergs

3. 3600 ergs

4. 5400 ergs

In an adjoining figure are shown three capacitors C₁, C₂ and C₃ joined to a battery. The correct condition will be (Symbols have their usual meanings) :

1. Q₁ = Q₂ = Q₃ and V₁ = V₂ = V₃ = V

2. Q₁ = Q₂ + Q₃ and V = V₁ + V₂ + V₃

3. Q₁ = Q₂ + Q₃ and V = V₁ + V₂

4. Q₂ = Q₃ and V₂ = V₃

In the circuit diagram shown in the adjoining figure, the resultant capacitance between P and Q is 

1. 47 μF

2. 3 μF

3. 60 μF

4. 10 μF

Two capacitances of capacity C₁ and C₂ are connected in series and potential difference V is applied across it. Then the potential difference across C₁ will be:

1. $V\frac{C_2}{C_1}$

2. $V\frac{C_1+C_2}{C_1}$

3. $V\frac{C_2}{C_1+C_2}$

4. $V\frac{C_1}{C_1+C_2}$

A capacitor of capacity C₁ is charged to the potential of V₀. On disconnecting with the battery, it is connected with a capacitor of capacity C₂ as shown in the adjoining figure. The ratio of energies before and after the connection of switch S will be

1. (C₁ + C₂)/C₁

2. C₁/(C₁ + C₂)

3. C₁C₂

4. C₁/C₂

Four capacitors each of capacity \(3~\mu\text{F}\) are connected as shown in the adjoining figure. The ratio of equivalent capacitance between \(A\) and \(B\) and between \(A\) and \(C\) will be:

1. \(4:3\)

2. \(3:4\)

3. \(2:3\)

4. \(3:2\)

A parallel plate condenser is filled with two dielectrics as shown. Area of each plate is \(A\) metre² and the separation is \(t\) metre. The dielectric constants are \(k_1\) and \(k_2\) respectively. Its capacitance in farad will be:

        
1. \(\frac{\varepsilon_{0} A}{t} \left( k_{1} + k_{2}\right)\)
2. \(\frac{\varepsilon_{0} A}{t} \frac{\left( k_{1} + k_{2}\right)}{2}\)
3. \(\frac{2\varepsilon_{0} A}{t} \left( k_{1} + k_{2}\right)\)
4. \(\frac{\varepsilon_{0} A}{t} \frac{\left( k_{1} - k_{2}\right)}{2}\)

Three condensers each of capacitance 2F are put in series. The resultant capacitance is 

1. 6F

2. $\frac{3}{2}F$

3. $\frac{2}{3}F$

4. 5F

Four condensers are joined as shown in the adjoining figure. The capacity of each is 8 μF. The equivalent capacity between the points A and B will be

1. 32 μF

2. 2 μF

3. 8 μF

4. 16 μF

The capacities and connection of five capacitors are shown in the adjoining figure. The potential difference between the points A and B is 60 volts. Then the equivalent capacity between A and B and the charge on 5 μF capacitance will be respectively

1. 44 μF; 300 μC

2. 16 μF; 150 μC

3. 15 μF; 200 μC

4. 4 μF; 50 μC